--- title: "Embed Free UK Soakaway Calculator Widget | BRE 365 SuDS Sizer | SoakawayCalculator.co.uk" source_url: "https://soakawaycalculator.co.uk/embed" retrieved_by: "AnswerRail Edge Engine v1.1.0-parity-v20 (https://answerrail.com)" level_of_detail: "standard" token_payload_reduction: "92.3%" raw_html_bytes: 48329 compiled_body_bytes: 3740 entities_extracted: 6 currency_recall_static_html: "not_applicable" rfc_compliance: "RFC 9110" last_verified_at: "2026-10-17T12:55:38.182Z" cache_age_seconds: 0 origin_cache_control: "public, max-age=0, must-revalidate" --- > **Canonical Source:** [https://soakawaycalculator.co.uk/embed](https://soakawaycalculator.co.uk/embed) > > *Embed the responsive UK BRE Digest 365 soakaway and drainage field calculator directly onto your architect, groundwork, or building merchant website.* ### Organization: SoakawayCalculator.co.uk (UK Drainage & Stormwater Advisory Desk) | Field | Value | | :--- | :--- | | **Organization** | SoakawayCalculator.co.uk (UK Drainage & Stormwater Advisory Desk) | | **Official Website** | https://soakawaycalculator.co.uk | | **Overview** | UK civil engineering & statutory building control advisory desk for stormwater soakaway attenuation and drainage fields. | ### Entity: Soakaway Calculator UK | Property | Detail | | :--- | :--- | | **Type** | WebSite | | **Name** | Soakaway Calculator UK | ### Entity: Soakaway Calculator UK | Property | Detail | | :--- | :--- | | **Type** | WebApplication | | **Name** | Soakaway Calculator UK | ### Entity: UK BRE Digest 365 & Approved Document H3 Soil Infiltration & Rainfall Rates | Property | Detail | | :--- | :--- | | **Type** | Dataset | | **Name** | UK BRE Digest 365 & Approved Document H3 Soil Infiltration & Rainfall Rates | | **Description** | Standardised geotechnical percolation parameters (f, Vp) and 10-year / 30-year design storm depths across UK local planning authorities and soil classifications.... | ### Frequently Asked Questions (FAQ) **Q: How far must a soakaway be from a house foundation?** > A: Under Building Regulations Approved Document Part H3 (paragraph 3.25) and BS EN 752-4, a soakaway must be installed at least 5.0 metres away from any building foundation or habitable structure, and at least 2.5 metres from property boundary lines, to prevent ground destabilisation and structural subsidence. **Q: What is the standard BRE Digest 365 percolation test procedure?** > A: BRE Digest 365 requires excavating a trial pit of representative depth (typically 1.5m to 2.5m) and measuring water fall from 75% full to 25% full depth (t_75-25). The test must be filled and observed three consecutive times to simulate pre-saturated soil conditions. The soil infiltration rate f is calculated as the storage volume V_75-25 divided by effective internal surface area a_p50 multiplied by t_75-25. **Q: What happens if soil percolation test fails due to heavy clay?** > A: If the soil infiltration rate f is less than 1 x 10^-6 m/s (or Vp > 100 s/mm in BS 6297), a conventional soakaway is infeasible and will trigger Building Control failure. Under the statutory Part H3 surface water hierarchy, you are legally entitled to bypass infiltration and apply for a Section 106 connection to a surface water or combined public sewer, or discharge to an attenuation tank with a hydro-brake flow restrictor. ### Step-by-Step Procedure: How to Conduct a BRE Digest 365 Percolation Test for Building Control #### 1. Excavate Trial Pit Excavate a trial pit to the proposed soakaway invert depth (typically 0.3m wide by 1.0m to 2.0m long). Ensure the base is level and not smeared. #### 2. Fill with Water to Inflow Level Fill the trial pit rapidly with clean water to the proposed effective storage level (at least 300mm depth). #### 3. Measure 75% to 25% Drain Time Record the exact time in seconds taken for water to fall from 75% depth to 25% depth (t_75-25). #### 4. Repeat for 3 Consecutive Runs Refill the pit immediately and record times for Run 2 and Run 3 to verify soil infiltration under saturated conditions. FREE EMBEDDABLE WIDGET # Embed the Soakaway Calculator on Your Website Architects, groundworkers, builders merchants, and planning consultants can embed our responsive BRE 365 calculation engine directly into their sites. HTML Iframe SnippetCopy Embed Code